High efficiency, energy saving, low carbon is the focus of today's global attention, various countries, especially developed regions in Europe and the United States have clear requirements for motor efficiency, China in 2012 promulgated the implementation of the motor mandatory energy efficiency standard GB18613-2012 "small and medium-sized motor energy efficiency limit value and energy efficiency grade". In order to meet the needs of domestic and foreign markets, the efficiency of YE3 series motors produced by our company fully meets the GB18613-2012 level 2 energy efficiency or IEC60034-30 level 3 energy efficiency regulations, and the technical level has reached the domestic leading level. And has obtained the China Quality Certification Center (CQC) issued the "China energy-saving product Certification certificate" and "China National Mandatory Product Certification (CCC) certificate" and the EU safety certification body issued the "CE certification" certificate. At present, this series of products also enjoy the national energy conservation policy subsidies.

Conditions of use:

[Power supply condition] Voltage fluctuation within ±5% (short-term allowable fluctuation within ±10%); Frequency fluctuation ±2% (short-term fluctuation ±5%). The motor and frequency fluctuate within ±5% at the same time, and the frequency fluctuation does not exceed ±2%.

[Use place] shall not be used in the environment containing flammable gases, chemical corrosive gases or other harmful gases (except for special environment motor).

[Ambient temperature] The ambient temperature varies with the season, but the maximum is not more than +40℃, the minimum is not less than -15℃ (except special ring temperature motor)

【 Altitude 】 Not more than 1000m (except high altitude motor)

[Transmission mode] Elastic coupling, spur gear and pulley drive are allowed

[Rotation direction] Clockwise (default), counterclockwise (order required)

[Starting method] Direct starting, Y/△ starting, step-down starting, frequency conversion starting, etc.

Product features:

1, suitable for general places and no special requirements of machinery, such as metal cutting machine tools, pumps, fans, transport machinery, mixers, agricultural machinery, food machinery, etc.

2, the efficiency of this series of motor reaches GB18613-2012 "Small and medium-sized motor energy efficiency limit value and energy efficiency grade" level 2 energy efficiency standard. Compared with the corresponding specifications of YX3 series, the efficiency is increased by 2%-3% on average; Compared with the corresponding specifications of ordinary Y2 series, the efficiency is increased by about 10% on average; Moreover, it has relatively flat efficiency characteristics in the load range of 50~100%.

3, the installation size and power level fully comply with IEC standards and DIN42673 standards, cooling method IC411.

4, protection grade IP55, cast iron shell dustproof and anti-splash, structure optimization, in line with international standards, safe operation is guaranteed

5, F class insulation, high heat resistance, strong impact resistance, long insulation life, can also be competent in harsh environments

6, the use of famous brand bearings, silicon steel sheet and enamelled round copper wire, the performance is guaranteed

7, standardized design, excellent raw materials, advanced processing equipment and perfect quality assurance system, good energy saving effect, low vibration, low noise, stable performance and safety.